Attribute | Value |
---|---|
Material | Stainless Steel |
Packing speed | 2-4 Bags per min |
Packing weight | 5-25kg |
Feeding mode | Double screw Feeding |
Voltage | 380 220V/50HZ |
Packing Accuracy | ±0.2% |
Measuring mode | Double vibrating mode |
Powder Auger Filling Machine
Measurement Method | Weighing Type (Packing container weighing) |
Filling Mode | Double Screw Feeding |
Packing mode | 5-25kg, 10-50kg |
Packing accuracy | ±0.2% |
Packaging Accuracy | 2-4 bags/min |
Power supply | 380 220V/50Hz |
Air Consumption | 6kg/m² 0.2 m³/min |
Total power | 3kw |
Machine Size | 1000mm × 1200mm × 2400mm |
Depending on material characteristics and required accuracy, it can pack approximately 2-4 bags per minute.
Precision is ensured by the electronic weighing feedback system combined with the three-stage servo motor control of the vertical screw feeder, allowing for fast coarse feed and slow fine feed/cut-off.
Yes, the vertical screw feeding system and controlled feed stages are specifically designed to handle challenging powders, including fine and aerated types, with minimized dust and consistent flow. Accuracy might vary slightly based on extreme flow characteristics.
The stainless steel construction and design of the screw and hopper facilitate easy cleaning. The vertical screw design is inherently easier to clean than auger systems.
The machine outputs filled bags ready for various sealing methods, including sewing (industrial, overlock, folding) or heat sealing (pneumatic, 3-in-1, ink wheel).